Hanna Instruments New Zealand
The Hanna Advantage: A Worldwide Leader in Technology and Innovation 100% Quality 360 Value

Iron II and III Reagent Set (300 tests) – HI96777-03

The HI96777-03 are reagents for the colorimetric determination of Iron II and III. There are enough reagents for 300 tests to be used with Hanna’s compatible photometers. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for traceability.

  • Pre-made reagents for ease of use
  • Prepared with high purity chemicals
  • Marked with expiration date and lot number

Mediray is Hanna Instruments’ authorised distributor in New Zealand. To purchase our products, please see the details below.

Surface water typically contains up to 0.7 mg/L of iron. Drinking water typically contains up to 0.3 mg/L of iron, but this level may increase significantly if plumbing fixtures contain iron. In well-oxygenated, non-acidic waters, iron exists mainly in the ferric form (Fe3+) and will precipitate as iron oxide hydroxide (FeO(OH)). However, anoxic water may have high levels of dissolved ferrous iron (Fe2+), which could precipitate in heating/cooling systems or other equipment after exposure to air. The Iron (II)/(III) method can be used to distinguish between the ferrous (Fe2+) and ferric (Fe3+) forms of iron in a 2-step measurement process.

The HI96777-03 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. These reagents use an adaptation of Standard Methods for the Examination of Water and Wastewater, 23rd Edition, 3500-Fe B, Phenanthroline Method. During the first measurement, ferrous iron (Fe2+) reacts with 1, 10-phenanthroline to form an orange-red complex. During the second measurement, ferric iron (Fe3+) is converted to ferrous iron (Fe2+) by the addition of Reagent B; the resulting measurement is the sum of ferrous (Fe2+) and ferric (Fe3+) iron.

Specifications

SKU HI96777-03
Name Iron II and III Reagent Set (300 tests) – HI96777-03
Package Packets
Quantity 300 tests
Method adaptation of Standard Methods for the Examination of Water and Wastewater, 23rd Edition, 3500-Fe B, Phenanthroline Method

Additional information

Parameter

Iron

Where to buy

Mediray is Hanna Instruments’ authorised distributor in New Zealand. To purchase our products, please see the details below.

Phone: 0800 633 472

[email protected]

www.mediray.co.nz